Honglida International trade > News > Encyclopedia > Rubber trimming machine abnormal situation how to deal with
Rubber trimming machine abnormal situation how to deal with
2015-03-20 15:01:38 Author:SystemMaster Source: Font size:[Large][Middle][Small]

One, Maintenance method, rubber edge trimming machine and fault treatment

1 bearing maintenance

1-1, open the main cylinder rotary fixing bolt;

1-2, by a fixed bolt on the lock position on the edge of the top, clockwise to lock the turntable;

1-3, the magnet for the turntable suction (step 2 top out by rotating disc cases);

1-4, the amount of oil into the oil hole, and then add some butter (butter);

1-5, mounted on the turntable, a locking screw;

Note: the new machine using two months after the first refueling, maintenance after one to two times per month.

2 check the electrical cabinet is clean;

3 inspection machine side and back to the normal rotation of fan;

4 check the belt tightness is suitable for;

5 back to check whether water drainage air filter, a day to avoid excessive moisture damage caused by electromagnetic valve.

Two, rubber screening machine and fault treatment and maintenance methods

Turn off power, remove the sieve tray, put the butter or oil adding sieve plate seat and the sliding iron contact surface and can be connected bar movable parts, refueling every ten days.